Vibralign Blog

Long Live the Machine

Blog Home

Categories: Shaft Alignment

Choosing the Best Way to Mount the Sensors of Your Laser Alignment Tool

|

By on July 9, 2012

The pictures above are just a few ways to mount your laser alignment tool to the machinery you are aligning. We at VibrAlign field phone calls from time to time from folks wanting to know if their setup will work. Basically, if each sensor is mounted securely to the shaft you are trying to measure and is indicative of it’s normal operation, you can get creative. Here are a few things to keep in mind:

  • It’s OK to mount to coupling hubs–just not the covers.
  • It’s OK if they are off-center. Just enter the dimensions as prompted on the display unit.
  • Make sure the sensors are mounted securely to the shaft or hub (see our recent Troubleshooting Looseness post).
  • Make sure the sensors can ‘see’ each other while measuring the alignment condition.
  • Make sure the sensors are not rubbing on anything (bolts, seals, etc.) while measuring.

Send us some pictures of your Fixturlaser shaft alignment system in action. I’ll include the pics (at my discretion–don’t want anybody getting in trouble!) in the gallery above.

About the Author

2 responses to “Choosing the Best Way to Mount the Sensors of Your Laser Alignment Tool”

  1. […] Choosing the Best Way to Mount the Sensors of Your Laser … […]

  2. Pumps says:

    Good Picture explanation thank you very much

Leave a Reply

 

Sign Up for our Training Newsletter

  • This field is for validation purposes and should be left unchanged.