Current Topics

Vibration Sensor Mounting Tips

| | |

By on September 13, 2018

Accelerometers by nature are sensitive tools. This sensitivity is heavily influenced by how the sensor is mounted. Standard accelerometers are mounted several ways based on need and application. Typical route-based data collecting will be done with a rare earth magnet. The magnet can be either flat or a two-pole type. This provides good data with […]

Read More

The 5 Most Useful Shaft Alignment Apps–Download Today!

| | | |

By on September 12, 2018

  Technology has made so many of our jobs easier, and this certainly includes the maintenance industry. One aspect of technology you should be taking advantage of if you are a maintenance foreman, team member, or technician is the many smartphone apps that exist to make your job easier and your plant more efficient. Below […]

Read More

What is the Difference between Unbalance and Runout?

| |

By on September 5, 2018

Unbalance and runout are two terms that we hear frequently in the predictive maintenance community. Both unbalance and runout can be serious issues and need to be addressed to prevent inefficient functioning and damage to machines. Unbalance occurs due to corrosion, erosion of the fan wheel, or if a correction weight is removed. Runout occurs […]

Read More

3 Common Reasons for Shaft Alignment Frustrations

| | |

By on September 4, 2018

Achieving a perfect alignment can seem daunting at times, but it doesn’t have to be if you have the right tools and if you know to look out for three common reasons for shaft alignment frustrations. Once you know these three factors, you can take the necessary steps to avoid them and/or correct them. The […]

Read More

The 3 Types of Unbalance You Should Know About

| |

By on September 4, 2018

We often hear about how to correct unbalance in rotating machinery, but to correct unbalance, it is first necessary to accurately diagnose what type of unbalance your machine is experiencing so that you can take the proper action to correct the problem. In this post, we will go over the three types of unbalance you […]

Read More

Here are 10 Important Steps of a Predictive Maintenance Plan

| |

By on September 4, 2018

As the resurgence of manufacturing and processing in America continues, the requirements on all of us to do more with less will only grow more important in order to reach the needed profitability goals. Combine this downward pressure with the diversity of today’s plants and their mechanical components, and the overwhelming gap of skilled workers […]

Read More

How to Measure Your Machine’s RPM

| | |

By on September 4, 2018

Determining the RPM (revolutions per minute) of your machine is an important part of conscientious condition monitoring. Significant loss of time and productivity can occur if your machinery is not operating at the correct RPM. That’s why it is imperative to be able to quickly and accurately determine the RPM. In this post we will […]

Read More

Condition Monitoring Basics: The Importance of Routes

By on July 31, 2018

One of the basics of condition monitoring is establishing routes so that you can efficiently check the diagnostics of all your machines in an orderly, structured way which does not disrupt the daily tasks of other workers in your plant. Routes help to guide the mechanic to the next machine in a logical order rather […]

Read More

Setting Tolerances in Fixturlaser Shaft Alignment Tools

| | | | | |

By on July 30, 2018

Fixturlaser Shaft Alignment Tools come pre-programmed with generally accepted industry tolerances for electric motor driven machinery.  These tolerances are based on the motor RPM and will give you an “endpoint” in the alignment process (based on the measured offset and angular misalignment at the center point of the coupling in both the vertical and horizontal […]

Read More

Pipe Strain/Stress

| | |

By on July 18, 2018

Not only do we write blog articles at VibrAlign, we also read them. Nearly every training session I conduct, pipe strain as a source of alignment frustration, comes up. I recently came across an excellent blog written by Ricky Smith CRL CMRP CMRT that I would like to share. There is some really good information […]

Read More

Using the Smart Machine Checker as a Lubrication Tool

| | | | |

By on July 10, 2018

The Fixturlaser Smart Machine Checker (SMC) is a great mechanic’s tool, for evaluating the overall health of rotating machinery.  But did you know it’s also a lubrication tool for greasing bearings?  Let me explain. One of the vibration measurements in the SMC is called Bearing Defect Factor.  The Bearing Defect Factor is a measurement of […]

Read More

Installation Errors Part 3 – Proper Torqueing of Hold Down Bolts

| | | | |

By on June 27, 2018

One of the most under-rated procedures of the precision shaft alignment process is the TIGHTENING SEQUENCE of the hold down bolts on the movable machine. Also, tightening the bolts to proper torque specifications is many times considered unnecessary and is just not typically done. Tightening sequence and proper bolt torque are critical to the performance […]

Read More

Permanent Mounted Sensors

| | | | | | | |

By on June 20, 2018

At the wrap up of a recent Hawk/SMC class the discussion was around what rotating assets to collect vibration data on going forward. The conversation quickly turned to a few keys assets that had the ability to impact large percentages of the downstream processes. The area technicians said that even though the machine was very […]

Read More

Just Get It Running, We’ll Fix It Later!

| | | | | |

By on June 13, 2018

  Sound familiar? I can’t tell you how many times I personally have heard this over the years. I am sure many of you have as well. The issue is, scheduled downtime seems to be put on the back burner so to speak, to meet production goals. And as it has become all too familiar, […]

Read More

Converting Dial Indicator Cold Alignment Targets with the Fixturlaser NXA

| | | | | | |

By on June 7, 2018

Even though laser shaft alignment systems have been in use for over 3 decades some industries have alignment tolerances and cold alignment targets in dial indicator terms or language. Take for instance the gas compression and processing industry. Many OEM’s, packagers, end users, and service companies use laser alignment systems, however their cold alignment targets […]

Read More