Posts tagged with: Verti-Zontal

Shimming when there are more than four feet on the moveable element.

| |

By on August 4, 2015

  When more than four feet are on the movable machine, it is necessary to shim under the additional feet. How do we determine what amount of shim is required to properly support these feet? This is debatable. Some would say that it is necessary to calculate the needed shims. Others might say “Why bother? […]

Read More

What is the Average Pump Repair Cost?

| | |

By on June 25, 2015

There are many pump types, sizes and applications. Positive displacement: gear, screw, progressive cavity, lobe, peristaltic, diaphragm, Velocity: radial & axial flow, mixed flow, educator, etc. With all the various pump types, sizes and applications it would be quite the feat to list the exact cost for each one in this blog. I will leave […]

Read More

Useful Field Apps for Today’s Maintenance Personnel

| | | | |

By on June 17, 2015

The world of machinery maintenance continues to grow with reliability and technology at the forefront of the majority of today’s maintenance programs. The mechanics toolbox must change to support these changes. Computer based manuals and programs were the first step into “the future” of machine maintenance. Now smart phones and tablets have more memory available […]

Read More

Adjustable Motor Plate Alignment using the Verti-Zontal Alignment Process

| | |

By on February 18, 2015

Recently while visiting a client’s site, we were asked for alignment advice regarding an electric motor coupled to a mixer. The customer shared that the electric motor sat upon an adjustable base plate with adjustment bolts (jack bolts) in the vertical and horizontal planes.   Despite the base plate having vertical jack bolts, VibrAlign’s typical […]

Read More

Video: Concepts of Shaft Alignment – Bearing Clearances

|

By on December 16, 2014

Another video in VibrAlign’s “Concepts of Shaft Alignment” video series is titled “Bearing Clearances”   The video illustrates radial and axial bearing clearances which can affect the precision shaft alignment process. The video was based on ideas for visualizing alignment created by David Zdrojewski, CEO of VibrAlign.  According to Zdrojewski, “One of my passions is […]

Read More

Uncoupled Shaft Alignment – It Doesn’t Need To Be Difficult.

| | | | |

By on October 13, 2014

The night before the OJT portion of a recent Fixturlaser GO Pro Training class, at a Combined Cycle Power Plant, the shim packs of the disc type coupling between a 3300 HP electric motor and fluid drive began to fail. The machine was shut down before any damage could occur and was waiting for our […]

Read More

Is Your Coupling Relaxed?

| | |

By on September 23, 2014

During the OJT portion of a Fixturlaser NXA Pro training class, at a power plant, the students asked me to allow them to perform the precision laser shaft alignment of a 75 HP electric motor to pump without interrupting them or offering any advice. I obliged and let them go on their way. The first […]

Read More

Loosen the Hold Down Bolts to Lower the Motor! ??

| | | |

By on August 22, 2014

While assisting a recent Fixturlaser NXA Training Class with a precision shaft alignment we came across an unusual alignment challenge.  When tightening the hold down bolts, after making a Verti-Zontal Compound MoveTM, we were seeing insignificant amounts of horizontal movement at the motor feet but nothing unusual. However, upon rechecking the alignment, we were out of […]

Read More

Fluid Drive Coupling and High Vibration? No Problem!

| | |

By on November 6, 2013

I recently took a call from a customer at a coal-fired power plant in Arkansas.  He was performing a precision laser shaft alignment of a 450 HP, 1750 RPM electric motor coupled by a fluid drive coupling to a gearbox on a coal conveyor. Similar to the one pictured above. This conveyor is one of […]

Read More

Working as a team? Communication is key!

| | | | |

By on September 9, 2013

During a recent Fixturlaser GO Pro Training class, at a mid-west university, we performed a shaft alignment on a large Flowserve HVAC pump with a 500 HP electric motor.  This motor was large enough that multiple people could work on both sides without really seeing each other.  Well, that proved to be an issue with […]

Read More

IS VIBRATION INTERFERING WITH YOUR PRECISION SHAFT ALIGNMENT?

| | | | | |

By on July 1, 2013

During a recent Fixturlaser XA Pro training class, at a Texas petrochemical plant, we were performing an alignment on a 25 HP, 3600 RPM electric motor & water pump.  At first the class was having a little trouble bringing the alignment into the 3600 tolerance due to two separate issues. The first was severe vibration […]

Read More

Bolt Bound? No Alternate Move Calculator? No Problem!

| | | | |

By on May 10, 2013

Previous blogs have discussed several different solutions for solving Base Bound & Bolt Bound conditions when preforming precision laser shaft alignment (Base/Bound Math and Solving Base/Bound Alignment Alignment Problems). Sometimes though, the solution for a Bolt Bound issue is fairly straight forward and what you need to do is right in front of your eyes […]

Read More

The Importance of Roughing-in Machines before Performing a Shaft Alignment.

| | | | | | |

By on January 24, 2013

During our Best Alignment Practices Training classes our staff of VibrAlign Trainers stresses the importance of rough aligning the machines as part of the pre-alignment steps.  The main reason to do so is to minimize the coupling influences on the movable and stationary machine’s rotational shaft center-lines so the final alignment can be completed with […]

Read More

Why do Pre-Alignment checks when using a Laser System for Shaft Alignment?

| | | |

By on January 2, 2013

While working on a sludge pump, several issues arose that could have caused alignment headaches that would have lasted hours. There isn’t any medication that would have removed that pain. In this scenario and all alignment jobs, Pre-Alignment is a MUST! I was asked to witness an alignment; a 400 HP motor driving a sludge […]

Read More

What if you had to leave a machine slightly misaligned? What would you choose, angle or offset?

| | | | | | |

By on December 19, 2012

As alignment professionals we all want to do the right thing and perform the best shaft alignment possible; however there may be a time when you have to choose and knowingly leave a machine slightly misaligned for the short-term until other corrections can be made to the equipment to get it to an “alignable” condition. […]

Read More